Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

POWER OUTPUT

Stereo mode (8 ohms 20 Hz - 20 kHz, THD 0.09%) 100 W + 100 W

Surround mode

(8 ohms at 1 kHz, THD 0.8%)

Front: 100 W/ch

Centera): 100 W

Reara): 100 W/ch

a)Depending on the sound field settings and the source, there may be no sound output.

5.1/DVD mode (8 ohms at 1 kHz, THD 0.8%)

Front: 100 W/ch

Center: 100 W

Rear: 100 W/ch

Dynamic power output

155 W + 155 W, 8 ohms

220 W + 220 W, 4 ohms

Frequency response

PHONO: RIAA equalization curve ±0.5 dB

CD, TAPE/MD, VIDEO 1, 2,:

10 Hz - 50 kHz +0.5/ –2 dB (with sound field, tone, and bass booster bypassed)

Inputs PHONO:

Sensitivity: 1.5 mV

Impedance: 50 kilohms S/Nb): 75 dB (A,

2.5mVc))

CD:

Sensitivity: 150 mV Impedance:

50kilohms S/Nb): 82 dB (A,

150mVc))

TAPE/MD, VIDEO 1, 2, VIDEO 3 (STR- DE625), VIDEO (STR-DE525), TV/ DBS (TV/LD): Sensitivity: 150 mV Impedance:

50kilohms S/Nb): 82 dB (A,

150mVc))

5.1/DVD INPUT

Sensitivity: 150 mV

Impedance:

50kilohms S/Nb): 82 dB (A,

150mVc))

b)78’ IHF

c)Weighted network, input level

Outputs

AUDIO OUT:

 

Voltage: 150 mV

 

Impedance:

 

10 kilohms

 

WOOFER:

 

Voltage: 2 V

 

Impedance:

 

1 kilohm

 

PHONES:

 

Accepts low- and

 

high-impedance

 

headphones

BASS BOOST +10 dB at 70 Hz

TONE

±10 dB at 100 Hz and

 

10 kHz

FM tuner section

Tuning range 87.5 - 108.0 MHz

Antenna terminals

75 ohms, unbalanced

Sensitivity Mono: 18.3 dBf, 4.5 µV Stereo: 38.3 dBf, 45 µV

Usable sensitivity

 

11.2 dBf, 2 µV (IHF)

S/N

Mono: 76 dB

 

Stereo: 70 dB

Harmonic distortion at 1 kHz

Mono: 0.3%

Stereo: 0.5%

Separation 45 dB at 1 kHz

Frequency response

30 Hz - 15 kHz +0.5/ –2 dB

Selectivity 60 dB at 400 kHz

Information Additional

39