Selecting the component (continued)
SPEAKERS A/B
Press SPEAKERS A/B button to output the sound from the speakers connected to the SPEAKERS FRONT terminals.
Each time you press the button, the display changes cyclically as follows:
SP. A tSP. B tSP. OFF
To drive | Select |
Speaker System A | SP. A |
(Connected to the |
|
SPEAKERS FRONT A |
|
terminals) |
|
|
|
Speaker System B | SP. B |
(Connected to the |
|
SPEAKERS FRONT B |
|
terminals) |
|
When you select “SP. OFF”, no sound will be output from your speakers and “SP. OFF” lights up in the display.
MUTING
Press MUTING to mute the sound. The muting function is canceled when you turn the power on or turn the MASTER VOLUME clockwise to turn the volume up.
PHONES
Use to connect headphones.
•When the headphones are connected, speaker output is automatically canceled and “SP. OFF” lights up in the display.
Changing the display
DISPLAY
Each time you press DISPLAY, the display changes cyclically as follows:
Index name of the component* tSelected component tSound field applied to the program source
When the tuner is selected
Index name of the preset station* or program station name** tFrequency tProgram type indication** tRadio text** tCurrent time** tSound field applied to the band or the preset station
*Index name appears only when you have assigned one to the component or preset station (page 37). Index name does not appear when only blank spaces have been entered, or it is the same as the function.
**During RDS reception only. (Models of area code CEL, CEK only. See page 35).
DIMMER
Press DIMMER repeatedly to adjust the brightness of the display (3 steps). However, when you press any button, the display becomes the brightest setting temporary.