xCONTROL A1
auto power on (A.PWR – XXX)
Lets you turn on the receiver automatically when the component connected via monaural miniplug cord (see page 13) is turned on and the playback is started.
When set to “NO”, you can save the power consumption of the receiver during standby mode.
xSelecting the command mode of the remote (C.MODE.AVX)
Lets you select the command mode of the remote. Change the command mode when you use 2 Sony receivers in the same room.
x2ch decode mode (
PRO LOGIC
)
Lets you specify the type of decoding for the 2 channel source. This receiver incorporates with Dolby Pro Logic II which has movie mode and music mode, and the receiver can reproduce the 2 channel sound in 5.1 channel through Dolby Pro Logic II.
•When set to “DOLBY PL”, the receiver performs the Pro Logic decoding. The source recorded in 2 channel is decoded into 4 channels.
•When set to “II MOVIE”, the receiver performs the Pro Logic II movie mode decoding. This setting is ideal for the movies encoded in Dolby Surround. Besides, this mode can reproduce the sound in 5.1 channel when watching the videos of old movies or in the dubbed language.
•When set to “II MUSIC”, the receiver performs the Pro Logic II music mode decoding. This setting is ideal for the normal stereo sources, such as CDs.
Note
Dolby Pro Logic II does not function for DTS or MPEG format signals.
CONTROL A1 control
system
Getting Started
This section explains the basic functions of the CONTROL A1 Control System. Certain components have special functions, such as “CD Synchro Dubbing” on cassette decks, that require CONTROL A1 connections. For detailed information regarding specific operations, be sure to also refer to the Operating Instructions supplied with your component(s).
The CONTROL A1 Control System was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1 connections provide a path for the transmission of control signals which enable automatic operation and control features usually associated with integrated systems.
Currently, CONTROL A1 connections between a Sony CD player, amplifier (receiver), MD deck and cassette deck provide automatic function selection and synchronized recording.
In the future, the CONTROL A1 connection will work as a multifunction bus allowing you to control various functions for each component.
Notes
•The CONTROL A1 Control System is designed to maintain upward compatibility as the Control System is upgraded to handle new functions. In this case, however, older components will not be compatible with the new functions.
•Do not operate a 2 way remote control unit when the CONTROL A1 jacks are connected via a PC interface kit to a personal computer running “MD Editor” or similar application. Also, do not operate the connected component in a manner contrary to the functions of the application, as this may cause the application to operate incorrectly.
continued
Operations Other