Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milliwatts to rated output (Models of area code U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
Reference Power Output (8 ohms 1 kHz, THD 0.7 %)
FRONT1): | 100 W/ch |
CENTER1): | 100 W |
SURR1): | 100 W/ch |
Models of area code CEL, CEK Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W2)
Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %)
FRONT1): | 100 W/ch |
CENTER1): | 100 W |
SURR1): | 100 W/ch |
Models of other area code
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W2)
Reference Power Output2) (8 ohms 1 kHz, THD 10 %)
FRONT1): | 120 W/ch |
CENTER1): | 120 W |
SURR1): | 120 W/ch |
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
| Area code | Power requirements |
| E2/E3, AU | 240 V AC, 50 Hz |
|
|
|
| SP, CEL, CEK, AR | 230 V AC, 50 Hz |
|
|
|
| TW | 110 V AC, 60 Hz |
|
|
|
| MX | 120 V AC, 60 Hz |
|
|
|
Frequency response |
| |
MULTI CH IN, | 10 Hz – 70 kHz | |
CD/SACD, AUX, | ||
MD/TAPE, DVD/LD, | field, equalizer, and bass | |
VIDEO 1, 2, 3 | boost bypassed) | |
|
| |
Inputs (Analog) |
| |
MULTI CH IN, | Sensitivity: 250 mV | |
CD/SACD, AUX, | Impedance: 50 kilohms | |
MD/TAPE, DVD/LD, | S/N3): 96 dB | |
VIDEO 1, 2, 3 | (A, 250 mV4)) |
3)INPUT SHORT (with sound field, equalizer and bass boost bypassed).
4)Weighted network, input level.
Inputs (Digital)
DVD/LD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
VIDEO 2, CD/SACD, | Sensitivity: – |
MD/TAPE (Optical) | Impedance: – |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs (Analog) |
|
MD/TAPE (OUT), | Voltage: 250 mV |
VIDEO 1 (AUDIO OUT) | Impedance: 10 kilohms |
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kilohms |
|
|
Outputs (Digital) |
|
|
|
MD/TAPE (Optical) | Sensitivity: – |
|
|
EQ |
|
Gain levels: | ±6 dB, 1 dB step |