Recording (continued) | Using the Sleep Timer | |||
| ||||
• Some sources contain copy guards to prevent | You can set the receiver to turn off | |||
recording. In this case, you may not be able to | automatically at a specified time. | |||
record from the sources. | ||||
|
|
| ||
• When MULTI CH IN is selected, no signals are | Press SLEEP on the remote while the | |||
output from DIGITAL OUT jacks (MD/TAPE | power is on. |
| ||
OPTICAL OUT). |
| |||
Each time you press the button, the display | ||||
| ||||
Recording on a video tape | changes cyclically as follows: | |||
You can record from a VCR, a TV, a DVD | ||||
tOFF |
|
| ||
player or an LD player using the receiver. You |
|
| ||
The display dims after you have specified the | ||||
can also add audio from a variety of audio | ||||
time. |
|
| ||
sources when editing a video tape. See the |
|
| ||
|
|
| ||
operating instructions of your VCR or LD | Tips |
|
| |
player if you need help. | • You can freely specify the time. After pressing | |||
1 Select the program source to be | SLEEP, specify the time you want using the jog dial | |||
and / | on the receiver. The sleep time changes | |||
recorded. | in 1 minute intervals. You can specify up to 5 | |||
2 Prepare the component for playing. | hours. |
|
| |
• To check the remaining time before the receiver | ||||
For example, insert the laser disc you want | turns off, press SLEEP. The remaining time | |||
to record into the LD player. | appears in the display. | |||
3 Insert a blank video tape into the VCR |
|
|
| |
Adjustments using the | ||||
(VIDEO 1) for recording. | ||||
4 Start recording on the recording VCR, | ||||
SET UP button | ||||
then start playing the video tape or | ||||
laser disc you want to record. | The SET UP button allows you to make the | |||
Tip | ||||
following adjustments. | ||||
You can record the sound from any audio source onto | ||||
1 Press SET UP. | ||||
a video tape while copying from a video tape or laser | ||||
disc. Locate the point where you want to start | ||||
2 Press |
|
| ||
recording from another audio source, select the | or | to select the parameter | ||
program source, then start playback. The audio from | you want to adjust. | |||
that source will be recorded onto the audio track of | 3 Turn the jog dial to select the setting | |||
the video tape instead of the audio from the original | ||||
medium. To resume audio recording from the original | you want. |
| ||
medium, select the video source again. | The setting is entered automatically. | |||
Notes | ||||
4 Repeat steps 2 and 3 until you have set | ||||
• Make sure to make both digital and analog | ||||
connections to the VIDEO 2 and DVD/LD inputs. | all of the parameters that follow. | |||
Analog recording is not possible if you make only | Initial settings | |||
digital connections. | ||||
|
|
| ||
• When MULTI CH IN is selected, the analog audio | Parameter |
| Initial setting | |
signals of the current function is output from the |
|
|
| |
C.MODE.AVX | AV2 | |||
REC OUT jacks. | ||||
|
|
| ||
PRO LOGIC |
| MOVIE | ||
|
| |||
|
|
| ||
| A.PWR – XXX | YES | ||
|
|
|
|