Press ENTER.

Other Operations

Naming preset stations

and program sources

You can enter a name (index name) of up to 8 characters for preset stations and program sources. These names (for example, “VHS”) appear in the receiver’s display when a station or program source is selected. Note that no more than one name can be entered for each preset station or program source.

This function is useful for distinguishing components of the same kind. For example, two VCRs can be specified as “VHS” and “8MM”, respectively. It is also handy for identifying components connected to jacks meant for another type of component, for example, a second CD player connected to the MD/TAPE jacks.

1 To name a preset station

Press TUNER, then tune in the preset station you want to create an index name for.

The last station you received is tuned in. If you are not familiar with how to tune in preset stations, see “Tuning to preset stations” on page 34.

To name a program source

Select the program source (component) to be named.

2 Press NAME.

3 Create an index name by using the jog dial and or :

Turn the jog dial to select a character, then press to move the cursor to the next position.

To insert a space

Turn the jog dial until a blank space appears in the display.

If you’ve made a mistake

Press or repeatedly until the character to be changed flashes, then turn the jog dial to select the right character.

4

5 Repeat steps 2 to 4 to assign index name for another station or program source.

Note

(Models of area code CEL, CEK only)

You cannot change the name of an RDS station.

Recording

Before you begin, make sure you’ve connected all components properly.

Recording on an audio tape or MiniDisc

You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help.

1 Select the component to be recorded.

2 Prepare the component for playing.

For example, insert a CD into the CD player.

3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary.

4 Start recording on the recording deck, then start playback on the playback component.

Notes

Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks.

The analog audio signals of the current function is output from the REC OUT jacks.

When MULTI CH IN is selected, the analog audio signals of the current function is output from the REC OUT jacks.

You cannot record a digital audio signal using a component connected to the analog MD/TAPE OUT jacks. To record a digital audio signal, connect a digital component to the DIGITAL MD/ TAPE OUT jacks.

continued

Operations Other

37GB