Remote

Operations

Function

Button

 

 

 

 

 

CLEAR

DVD player

Press if you made a

 

 

mistake when you press

 

 

the number button or

 

 

press to return to the

 

 

continuous play etc.

 

 

 

SEARCH

DVD player

Select searching mode.

MODE

 

Press to select the unit for

 

 

search (track, index, etc.)

 

 

TOP MENU DVD player

Displays DVD title.

/GUIDE

 

 

 

 

AV MENU VCR/Satellite/

Displays menu.

 

tuner/

 

 

DVD player

 

 

 

 

O

VCD player/

Returns to the previous

 

LD player/

menu or exits the menu.

 

DVD player

 

 

 

 

V/v/B/b

VCR/Satellite

Selects a menu item.

 

tuner/

 

 

DVD player

 

 

 

 

ENTER/

VCR/satellite

Press to enter the

EXECUTE

tuner/

selection.

 

DVD player

 

 

 

 

TV ?/1

TV

Turns the TV on or off.

 

 

 

-/--

TV

Selects the channel

 

 

entry mode, either one

 

 

or two digit.

 

 

 

TV VOL

TV

Adjust the volume of the

+/–

 

TV.

 

 

TV CH +/– TV

Select preset TV

 

 

channels.

 

 

 

TV/

TV

Selects input signal: TV

VIDEO

 

input or video input.

 

 

 

WIDE

TV

Selects the wide picture

 

 

mode.

 

 

USE MODE Remote

To set up the

 

 

remote.

 

 

 

AV1 and

Remote

Select the command

AV2

 

mode of the remote.

 

 

 

SOURCE

Remote

Selects 2ND AV output.

 

 

 

ALT

Remote

Change remote key

 

 

function to activate those

 

 

buttons with orange

 

 

printing.

 

 

 

Notes

Some functions explained in this section may not work depending on the model of the receiver.

The above explanation is intended to serve as an example only.

Therefore, depending on the component the above operation may not be possible or may operate differently than described.

The TV/SAT, PHONO, SOURCE, MPX/DUAL, ANALOG DIRECT, 12 and ON SCREEN functions are not available for set operation.

Selecting the mode of the

remote

Set the remote mode using the USE MODE button and the remote mode buttons.

Selecting the command mode

You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver.

Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE.

The indicator lights once (twice for AV2) , then the command mode switches.

To check the mode of the remote

Press USE MODE. You can check the remote by the indicator.

Mode

Indicator lights

AV1once

AV2twice

To reset the remote to factory settings

Press =/1, AV =/1, and MASTER VOL – at the same time.

The indicator lights 3 times, then goes off.

Using Operations Remote the PP411-RM

45GB