Sony STR-DG1000 manual 10

Name	Function
Q CAT	Lights up when “ALL
	CATEGORY” mode is
	changed to “ONE
	CATEGORY” mode during
	XM Radio operation (page
	85).

RZONE 2 Lights up while operation in zone 2 is being enabled.

S SLEEP	Lights up when the sleep
	timer is activated (page 96).
T L.F.E.	Lights up when the disc
	being played back contains
	an L.F.E. (Low Frequency
	Effect) channel and the
	L.F.E. channel signal is
	actually being reproduced,
	the bars underneath the
	letters light up to indicate
	the level. Since the L.F.E.
	signal is not recorded in all
	parts of the input signal the
	bar indication will fluctuate
	(and may turn off) during
	playback.
U ;PRO	Lights up when the receiver
LOGIC (II/	applies Pro Logic
IIx)	processing to 2 channel
	signals in order to output
	the center and surround
	channel signals. “;PRO
	LOGIC II” also lights up
	when the Pro Logic II
	MOVIE/MUSIC/GAME
	decoder is activated.
	“;PRO LOGIC IIx” also
	lights up when the Pro
	Logic IIx MOVIE/MUSIC/
	GAME decoder is activated
	(page 73).
	Note
	This indicator does not light if
	both the center and surround
	speakers are set to “NO” (page
	67).

Name	Function
V NEO:6	Lights up when DTS Neo:6
	Cinema/Music decoding is
	activated (page 73).
W DISCRETE	Lights up when DTS-ES
	Discrete decoding is
	activated (page 62).
X MATRIX	Lights up when DTS-ES
	Matrix decoding is
	activated (page 62).
Y SP-A/SP-B/	Lights up according to the
SP-OFF	speaker system used (page
	40).
	“SP-OFF” lights up when
	“SP-OFF” is selected or
	headphones are connected.
Z PRESET	Lights up when TUNING
	MODE is “PRESET.”
wj Tuner	Lights up when using the
indicators	receiver to tune in radio
	stations (page 80–88),etc.
wk MEMORY	Lights up when a memory
	function, such as Name
	Input (page 90) etc., is
	activated.
wl VOLUME	Displays the current
	volume.

10GB