The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone.
4
2
5
1 Turn on the main receiver (this receiver).
The remote switches to zone 2 mode.
2 Press ZONE 2.
3 Turn on the amplifier in zone 2 if it is used in zone 2.
4 Press one of the input buttons
on the remote to select the source signals you want to output.
For zone 2, analog video and audio signals are output. When you select “SOURCE,” the signals of the current input selected in the main zone are output.
5 Adjust to a suitable volume.
•In the case of illustration 1 (page 98), you can only adjust the surround back speaker volume in zone 2.
1Set “SUR BACK SP” to “ZONE 2” in the Speaker Settings menu (page 67).
2Adjust the volume using MASTER
VOL+/– on the remote.
•In the case of illustration 2 (page 99), adjust the volume using the receiver of zone 2.
Tips
•Even when this receiver is turned off, the receiver in zone 2 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the RM- AAL003 remote at the same time (SYSTEM STANDBY).
•Only signals from components connected to the analog input jacks are output through the ZONE 2 jacks. No signals are output from components connected to only the digital input jacks.
•When “SOURCE” is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT jacks even when MULTI IN is selected. The analog audio signals of the current function are output.
•When “TUNER” is selected, the same type of radio station (FM/AM/XM) selected in the main zone is selected in zone 2. When the receiver in the main zone is turned off, or an input source other than “TUNER” is selected, you can select a broadcast from FM/AM/XM in zone 2.
100GB