4 Point the remote code receiver section of the remote toward the receiver/transmitter on the remote control to be learned from.

While the second remote is receiving the signal, the input button selected in step 2 turns off.

About 5 cm - 10 cm (2" - 4")

5 The RM SET UP button flashes twice, then the learning process is completed.

When the learning process fails, the RM SET UP button flashes five times. Try to perform process again from step 2.

6 Press RM SET UP to finish the Learning function process.

Tips

When the memory capacity for storing remote control codes reaches a certain limit, the RM SET UP button flashes 10 times, and then the learning process ends.

If the RM SET UP button flashes five times in step 1, and the learning process does not start, replace the batteries with new ones.

To cancel learning

Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings.

Using a command that has been learned

When selecting a learned input, press the button used to learn that function.

To erase the learned code

1Press TV while pressing RM SET UP.

2Press the input button (VIDEO 1 in the example) for which you want to clear the setting.

The input button flashes. (The RM SET UP button remains lit.)

3Press ?/1 for more than 1 second.

The input button flashes twice, repeatedly.

4Press the input button to clear the stored setting.

The RM SET UP button flashes twice, then the clearing process is completed.

When the clearing process fails, the RM SET UP button flashes five times. Try to perform process again from step 2.

110GB