*Each video input can be adjusted independently for every INPUT SELECTOR. The adjusted value is held until the memory of this receiver is cleared. The adjusted value is retained, even if the power is turned off or the power cord (mains lead) is pulled out.

xNAME IN? (Naming inputs)

Lets you set the name of inputs selected. For details, see “Naming inputs” (page 90).

Settings for the speakers(Speaker Settings menu)

You can use the Speaker Settings menu to set the size and distance of the speakers connected to this system. Select “Speaker Settings” in the setting menus. For details on adjusting the parameters, see “Navigating through menus” (page 54) and “Overview of the menus” (page 55).

Speaker Settings menu parameters

xSUB WOOFER (Sub woofer)

• YES

If you have connected a sub woofer, select “YES.”

• NO

If you have not connected a sub woofer, select “NO.” This activates the bass redirection circuitry and outputs the L.F.E. (Low Frequency Effect) signals from other speakers.

Tip

In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer’s cut off frequency as high as possible.

xFRONT SP (Front speakers)

• LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE.” Normally, select “LARGE.” When the sub woofer is set to “NO,” front speakers are automatically set to “LARGE.”

• SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi-channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to “SMALL,” the center, surround, and

66GB