Switching between digital and analog audio

(INPUT MODE)

When you connect components to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch.

1

2

3

1 Press the input button.

You can also use INPUT SELECTOR on the receiver.

2 Press RECEIVER.

Receiver operation is enabled.

3 Press INPUT MODE repeatedly to select the audio input mode.

The selected audio input mode appears on the display.

Audio input modes

AUTO

Gives priority to digital audio signals when there are both digital and analog connections.

If there are no digital audio signals, analog audio signals are selected.

COAX

Specifies the digital audio signals input to the DIGITAL COAXIAL jack.

OPT

Specifies the digital audio signals input to the DIGITAL OPTICAL jack.

ANALOG

Specifies the analog audio signals input to the AUDIO IN (L/R) jacks.

Notes

You cannot select the digital audio input assigned to another function using the DIGITAL ASSIGN function (page 92).

Some audio input modes may not be set up depending on the input.

When either HDMI input or XM Radio is selected, “------” appears on the display, and you cannot select other modes. Select an input mode other than the HDMI input and XM Radio, then set the audio input mode.

When the ANALOG DIRECT function is being used, or MULTI IN is selected, audio input is set to “ANALOG.” You cannot select other modes.

Operations Other

91GB