To operate the receiver using an IR repeater

You can operate the receiver without pointing the remote toward the IR sensor of the receiver if you use an IR repeater.

Use an IR repeater when you install the receiver in a place where signals from the remote cannot reach.

STR-DG1000

IR repeater

(not supplied)

RM-AAL003

Using a bi-amplifier connection

If you are not using surround back speakers, you can use the SURROUND BACK SPEAKERS terminals for the front speakers for use with a bi-amplifier connection.

To connect speakers

Front speaker

Frontspeaker

(R)

(L)

Hi

Hi

Lo

Lo

Operations Other

Connect the terminals on the Lo (or Hi) side of the front speakers to the FRONT SPEAKERS A terminals, and connect the terminals on the Hi (or Lo) side of the front speakers to the SURROUND BACK SPEAKERS terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver.

To set up speakers

Set “SUR BACK SP” to “BI-AMP” in the Speaker Settings menu (page 67). The same signals output from the FRONT SPEAKERS A terminals can be output from the SURROUND BACK SPEAKERS terminals.

continued

101GB