5:Preparing the receiver and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord | AC OUTLET |
| AC OUTLET |
| SWITCHED 100W/0.4A MAX |
| L | L |
|
+ | – | + | – |
| R | R |
|
| FRONT A | FRONT B |
|
SPEAKERS 
To the wall outlet
Notes
•Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.
•The AC OUTLET on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.
•Make sure that the total power consumption of the component connected to the receiver’s AC OUTLET does not exceed the wattage stated on the rear panel. Do not connect
Performing initial setup operations
Before using the receiver for the first time, | Getting | |||
initialize the receiver by performing the |
| |||
following procedure. This procedure can also | Started | |||
be used to return settings you have made to | ||||
| ||||
their factory defaults. |
|
|
| |
Be sure to use the buttons on the receiver for |
| |||
this operation. |
|
|
| |
1,2 |
|
|
| |
?/1 |
|
|
| |
| MASTER VOLUME |
| ||
TUNING MODE | DISPLAY INPUT MODE |
|
| |
– TUNING + | INPUT SELECTOR |
|
| |
SPEAKERS |
|
|
| |
(OFF/A/B/A+B) |
|
|
| |
VIDEO 3 IN/ |
|
|
| |
PORTABLE AUDIO IN |
|
|
| |
BASSTREBLE A.F.D. MOVIE MUSIC DIRECT | WOOFER |
|
| |
ON/OFF | MUTING |
| ||
PHONES
1 Press ?/1 to turn off the receiver.
2 Hold down ?/1 for 5 seconds.
After “CLEARING” appears on the display for a while, “CLEARED” appears.
The following items are reset to their factory settings.
•All settings for the speaker system and sound adjustment.
•The sound field memorized for each input and preset station.
•All sound field parameters.
•All preset stations.
•MASTER VOLUME is set to “VOL MIN”.
•Input is set to “DVD”.
19GB