Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time.
Press SLEEP repeatedly while the power is on.
Each time you press the button, the display changes cyclically as follows:
tOFF
When Sleep Timer is being used, “SLEEP” lights up on the display.
Tip
To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled.
Recording audio using the receiver
You can record audio from a VCR, TV, cassette deck or MD deck using the receiver. For details, refer to the operating instructions supplied with your recording component.
1 Press one of the input buttons to select the playback component.
You can also use INPUT SELECTOR on the receiver.
2 Prepare the playback component for playing.
For example, insert a CD into the CD player.
3 Prepare the recording component.
For example, insert a blank MD, etc. into the recording deck and adjust the recording level.
4 Start recording on the recording component, then start playback on the playback component.
Notes
•Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks.
•Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the source.
Operations Other
39GB