Storing FM stations automatically
(AUTOBETICAL)
This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals.
If you want to store FM or AM stations one by one, see “Presetting radio stations” (page 35). Be sure to use the buttons on the receiver for this operation.
1,22
?/1
|
|
|
|
|
| MASTER VOLUME | |
TUNING MODE |
|
|
|
| DISPLAY | INPUT MODE |
|
– TUNING + |
|
|
|
| INPUT SELECTOR |
| |
SPEAKERS |
|
|
|
|
|
|
|
(OFF/A/B/A+B) |
|
|
|
|
|
|
|
VIDEO 3 IN/ |
|
|
|
|
|
|
|
PORTABLE AUDIO IN |
|
|
|
|
|
|
|
BASS | TREBLE | A.F.D. |
| MUSIC | DIRECT | WOOFER |
|
MOVIE | ON/OFF | MUTING | |||||
PHONES
1 Press ?/1 to turn off the receiver.
2 Hold down INPUT MODE and press ?/1 to turn the receiver back on.
For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the ones with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2- character preset code. For more details on RDS, see page 36.
Regular FM stations are assigned 2- character preset codes and stored after the RDS stations.
When this process is finished, “FINISH” appears on the display momentarily and the receiver returns to normal operation.
Notes
•Do not press any button on the receiver or supplied remote during autobetical operation, except ?/1.
•If you move to another area, repeat this procedure to store stations in your new area.
•For details on tuning the stored stations, see “Tuning to preset stations” (page 35).
•If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again.
34GB