xA.V. SYNC. (A/V Sync)

•A.V.SYNC. Y (Yes) (Delay time: 68 ms) The audio output is delayed so that the time gap between the audio output and visual display is minimized.

•A.V.SYNC. N (No) (Delay time: 0 ms) The audio output is not delayed.

Notes

•This parameter is useful when you use a large LCD or plasma monitor or a projector.

•This parameter is valid only when you use a sound field selected with the A.F.D. button.

•This parameter is not valid when

–PCM 96 kHz or DTS 2048 signals are input.

–ANALOG DIRECT function is selected.

xSW PHASE (Sub woofer phase polarity)

Lets you set the sub woofer phase polarity.

•NORMAL

Normally, select “NORMAL”.

•REVERSE

Depending on the type of front speakers, the position of the sub woofer, and the cut-off frequency of the sub woofer, setting the phase polarity to “REVERSE” may produce better bass. Besides bass reproduction, the richness and tightness of the overall sound may also be affected. While listening from the main listening position, select the setting that best suits your environment.

xDIMMER (Brightness of the display)

Lets you adjust the brightness in 3 steps.

Adjusting the tone

You can adjust the tonal quality of the front speakers using the TREBLE +/– and BASS +/– buttons on the receiver.

Press TREBLE +/– repeatedly to adjust the treble level and press BASS +/– repeatedly to adjust the bass level.

Initial setting: 0 dB

You can adjust from –6 dB to +6 dB in 1 dB step.

28GB