Other Operations

Switching the audio input mode

(INPUT MODE)

You can select the audio input mode by setting the audio input mode when you connect components to both digital and analog audio input jacks on the receiver.

1 Turn INPUT SELECTOR on the receiver to select the input.

You can also use the input buttons on the remote.

2 Press INPUT MODE repeatedly on the receiver to select the audio input mode.

The selected audio input mode appears on the display.

Audio input modes

AUTO IN

Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected.

COAX IN

Specifies the digital audio signals input to the DIGITAL COAXIAL jack.

OPT IN

Specifies the digital audio signals input to the DIGITAL OPTICAL jack.

ANALOG

Specifies the analog audio signals input to the AUDIO IN (L/R) jacks.

Note

Some audio input modes may not be set up depending on the input.

Changing the display

You can check the sound field, etc., by changing the information on the display.

Be sure to use the buttons on the receiver for this operation.

Press DISPLAY repeatedly.

Each time you press the button, the display changes cyclically as follows.

All inputs except the FM and AM band

Selected input t Sound field currently applied

FM and AM band

Program Service name* t Frequency t Program Type indication* t Radio Text indication* t Current Time indication (in 24- hour system mode)* t Sound field currently applied

*During RDS reception only (page 36).

38GB