Specifying the speaker parameters
1 Press MAIN MENU repeatedly to select the SET UP menu.
2 Move the V/v/B/b button up or down to select the parameter you want to adjust.
3 Move the V/v/B/b button to left or right to select the setting you want.
4 Repeat steps 2 to 3 until you have set all of the parameters that follow.
Initial settings
Parameter | Initial setting | ||
L | R | (FRONT) | LARGE |
C | (CENTER) | LARGE | |
SL | SR | (SURR) | LARGE |
SW | S.W. XXX (SUB WOOFER) YES | ||
L | R | DIST. XX.X m | 5.0 m |
C | DIST. XX.X m | 5.0 m | |
SL | SR | DIST. XX.X m | 5.0 m |
SL | SR | PL. XXX | BEHD. |
SL | SR | HGT. XXX | LOW |
Tips for the speaker settings
When you use micro satellite speaker system, you can easily adjust the settings for the speaker size and sub woofer selection. Turn off the power, then turn on again while pressing the MUTING button. “MICRO SP.” appears in the display and the speaker size and the sub woofer selection are fixed to the following settings.
Speakers | Settings |
Front | SMALL |
|
|
Center | SMALL |
|
|
Surround | SMALL |
|
|
Sub woofer | YES |
|
|
You cannot change the configuration if you choose
MICRO SP.
To reset to the normal settings, turn off the power, then turn on again while pressing the MUTING button.
xFront speaker size (
L 
R 
)
•If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”.
•If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer.
•When the front speakers are set to “SMALL”, the center and surround speakers are also automatically set to “SMALL” (unless previously set to “NO”).
continued
Up Hooking
Setting and the Up System Speaker