Checking the connections
After connecting all of your components to the receiver, do the following to verify that the connections were made correctly.
1 Press ?/1 to turn on the receiver.
2 Press a function button to select a component (program source) that you connected (e.g., DVD player).
3 Turn on the component and start playing it.
4 Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after performing this procedure, see “Troubleshooting” on page 27 and take the appropriate measures to correct the problem.
Switching the setting of fan control
Hold down PLII button and press ?/1to change the fan control setup. Each time you do the procedure above, the following setup appears.
Select | To |
FAN ON* | Turn on the fan at all times. |
|
|
FAN AUTO | Turn on the fan automatically |
| when there is sufficient speaker |
| output. |
|
|
* Initial setting. |
|
Basic Operations
Selecting the component
Function buttons
Press a function button to select the component you want to use.
To select | Press |
VCR | VIDEO |
|
|
DVD player | DVD |
|
|
TV or digital | TV/SAT |
satellite tuner (etc.) |
|
|
|
Tuner | TUNER |
|
|
After turning on the component you selected, select the component and play the program source.
MUTING
Press MUTING to mute the sound. MUTING appears on the display when the sound is muted. To cancel muting, press it again or turn up the volume.
The muting function is also canceled when turning the power off, or disconnecting the power cord.
Operations Basic