Multi channel surround setup (continued)
Adjusting the speaker level
Use the remote while seated in your listening position to adjust the level of each speaker.
1 Press ?/1 to turn on the receiver.
2 Turn MASTER VOLUME on the receiver clockwise.
3 Turn on the power of the sub woofer.
4 Press TEST TONE.
You will hear the test tone from each speaker in sequence.
Front (left) t Center t Front (right) t Surround (right) t Surround (left) t Sub woofer
5 Adjust the level parameters so that the level of the test tone from each speaker sounds the same when you are in your main listening position.
To adjust the balance and level of speakers, press MAIN MENU repeatedly to select LEVEL menu, move the V/v/B/b button up or down to select the parameter you want to adjust (page 21). Then move the V/v/B/b button to left or right to select the setting, and press the button to enter the selection.
6 Press TEST TONE again to turn off the test tone.
Tip
You can adjust the level of all speakers at the same time. Turn MASTER VOLUME on the main unit or press MASTER VOL +/– on the remote.
Notes
•The front balance, center level, surround level, and sub woofer level are shown in the display during adjustment.
•To enjoy the better sound quality, do not turn the volume of the subwoofer too high.