Other Operations
Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time.
After pressing ALT (page 35), press SLEEP while the power is on.
Each time you press the button, the display changes cyclically as follows:
tOFF
To specify the time freely
1After pressing ALT (page 35), press SLEEP.
2After pressing MAIN MENU (page 35), press the V/v/B/b button to specify the time you want.
The sleep timer changes in 1 minute intervals. You can specify up to 5 hours.
Tip
To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display.
Adjustments using the
SET UP menu
The SET UP menu allows you to make the following adjustments.
1 Press MAIN MENU repeatedly to select the SET UP menu.
2 Move the V/v/B/b button up or down to select the parameter you want to adjust.
3 Move the V/v/B/b button to left or right to select the setting you want.
4 Repeat steps 2 to 3 until you have set all of the parameters that follow.
Initial settings
Parameter | Initial setting |
xAudio input mode for DVD function
Lets you select the audio input mode for DVD function.
•“AUTO” gives priority to the analog audio signals input to the DVD IN (L/R) jacks when there is no digital audio signals.
•“COAX” specifies the digital audio signals input to the DIGITAL DVD COAX input jacks.
•“OPT” specifies the digital audio signals input to the DIGITAL DVD OPTICAL input jacks.
•“ANLG” specifies the analog audio signals input to the DVD IN (L/R) jacks.
continued
Operations Other