xFront speaker distance
( L R DIST. XX.X m)
Set the distance from your listening position to the front speakers (A on page 12).
xCenter speaker distance ( C DIST. XX.X m)
Set the distance from your listening position to the center speaker. Center speaker distance should be set from a distance equal to the front speaker distance (A on page 12) to a distance
1.5meters closer to your listening position (B on page 12).
xSurround speaker distance
(SLSR DIST. XX.X m)
Set the distance from your listening position to the surround speakers. Surround speaker distance should be set from a distance equal to the front speaker distance (A on page 12) to a distance 4.5 meters closer to your listening position (C on page 12).
Tip
The receiver allows you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front speakers.
Also, the center speaker cannot be set more than 1.5 meters closer than the front speakers.
Likewise, the surround speakers can not be set farther away from the listening position than the front speakers. And they can be no more than 4.5 meters closer.
This is because incorrect speaker placement is not conducive to the enjoyment of surround sound. Please note that, setting the speaker distance closer than the actual location of the speakers will cause a delay in the output of the sound from that speaker. In other words, the speaker will sound like it is farther away.
For example, setting the center speaker distance
Adjusting these parameter while listening to the sound often results in much better surround sound. Give it a try!
xSurround speaker position
(SLSR PL. XXX)*
This parameter lets you specify the location of your surround speakers. Refer to the illustration
below. |
|
| Hooking | |
• Select “SIDE” if the location of your surround | ||||
| ||||
speakers corresponds to section A. |
| |||
• Select “MID” if the location of your surround | Up | |||
speakers corresponds to section B. | ||||
and | ||||
• Select “BEHD.” if the location of your | ||||
| ||||
surround speakers corresponds to section C. | SettingUp the | |||
|
|
| ||
C | C |
| Speaker | |
| 90° |
|
| |
A | 60° | A |
| |
B | 30° | B |
| |
| 20° |
| System | |
x Surround speaker height |
(SLSR HGT. XXX)*
This parameter lets you specify the height of your surround speakers. Refer to the illustration below.
•Select “LOW” if the location of your surround speakers corresponds to section A.
•Select “HIGH” if the location of your surround speakers corresponds to section B.
B | B |
| 60 |
A | A |
| 30 |
*These parameters are not available when “Surround speaker size” is set to “NO”.
continued