2 With the TV [/1 button pressed down, enter the TV’s manufacturer code using the number buttons.
For instance, to enter “09,” press “0” then “9.” After you enter the last number, release the TV [/1 button.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
| Manufacturer | Code number |
| |
| Sony | 01 (default) | ||
|
|
|
|
|
| Hitachi | 24 |
|
|
|
|
|
|
|
| JVC | 33 |
|
|
|
|
|
|
|
| Panasonic | 17, 49 |
|
|
|
|
|
|
|
| Philips | 06, 08 |
|
|
|
|
|
|
|
| Samsung | 71 |
|
|
|
|
|
|
|
| Sanyo | 25 |
|
|
|
|
|
|
|
| Thomson | 43 |
|
|
|
|
|
|
|
| Toshiba | 38 |
|
|
|
|
|
| |
| The remote performs the following: | |||
|
|
|
| |
| Buttons | Operations | ||
|
|
|
| |
| TV [/1 | Turns your TV on or off | ||
|
|
|
| |
| TV VOL +/– | Adjusts the volume of | ||
|
| your TV | ||
|
|
|
| |
| TV PROG +/– | Selects the programme | ||
|
| position on your TV | ||
|
|
|
| |
| TV/VIDEO | Switches your TV’s | ||
|
| input source | ||
|
|
|
|
|
|
|
|
|
|
To operate the TV/VIDEO button
The TV/VIDEO button switches the input source on your TV. Point your remote at the TV when using this button.
When you connect the recorder to the TV via the SCART jacks, the input source for the TV is set to the recorder automatically when you turn on the recorder. To watch another source, press the TV/ VIDEO button to switch the TV’s input source.
If the supplied remote interferes with your other Sony Hard Disk recorder, set the command mode number for this recorder and the supplied remote to one that differs from the other Sony Hard Disk recorder after you have completed “Step 6: Auto Tuning (Full Channel Scan)” (page 13).
The default command mode setting for this recorder and the supplied remote is HDD 1.
Number buttons
SYSTEM
MENU
</M/m/,,
ENTER
RETURN
1 Check that “Step 6: Auto Tuning (Full Channel Scan)” on page 13 has been finished.
2 Press SYSTEM MENU.
3 Select “SETUP,” and press ENTER.
SETUP | 12:15 |
Setup Options
DTV Settings
Options
Features
Technical infos
4 Select “Features,” and press ENTER.
12