Plug the cable attached to the AC adapter 1into the DC In connector 2 on the recorder.

Step 3: Connecting the Audio Cords

You can improve sound quality by connecting a stereo system to the AUDIO OUT R-L jacks as shown below.

Hard disk recorder

to AUDIO L-R

to Line IN

 

Audio cord (not supplied)

 

zHint

For correct speaker location, see the operating instructions supplied with the connected components.

Step 4: Connecting the Mains Lead

Hard disk recorder

2

 

AC Adapter

Power Cord

to DC IN 12V

3

to mains

 

1

 

 

1

2 Plug one end of the power cord 3into the AC adapter.

3 Plug the other end of the power cord into the mains.

Then plug the recorder and TV mains leads (power cords) into the mains.

After you connect the mains lead, you must wait for a short while before operating the recorder. You can operate the recorder once the front panel display lights up and the recorder enters standby mode.

If you connect additional equipment to this recorder (page 9), be sure to connect the mains lead after all connections are complete.

10