Audio Language
You can set your Hard Disk Recorder to play the audio track in the language you prefer if that language is available.
1Follow steps 1 to 3 of “Video and Audio Settings (Options)” on page 42, then select “Audio Language.”
2Press the </, buttons to set the desired language.
Each time you press the buttons, the setting on the TV screen changes as follows.
English 
Welsh 
Unknown 
Gaelic 
3Press the RETURN button to return to the Options menu.
bNote
If the programme broadcast carries the optional audio language you have chosen, you will hear that language. Otherwise, you will only be able to listen in the default language.
Audio Level
The following setup adjusts the audio signal output level when you connect a component such as TV or an audio amplifier.
This function affects the output of the following jacks:
–AUDIO OUT
–LINE 1 – TV jack
1Follow steps 1 to 3 of “Video and Audio Settings (Options)” on page 42, then select “Audio Level.”
2Press the </, buttons to set the desired output level.
You can adjust from step 100 (full audio output) to 0. Each press reduces or advances the audio level in increments of 5 units.
3Press the RETURN button to return to the Options menu.
Recording/Hard Disk
Recorder and Remote
Control Settings/Factory
Settings (Features)
The “Features” setup allows you to set up operational settings for the unit such as Subtitle Language and Command Mode.
1 Press SYSTEM MENU while the recorder is in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Features,” and press ENTER.
The “Features” setup appears with the following options. The default settings are underlined.
| SETUP | 12:15 |
|
|
| |||
|
| Features | Setting |
| ||||
|
|
|
|
|
| |||
|
| Record Subtitles | Off |
| ||||
|
| Subtitle Language | English |
| ||||
|
| Interactivity | On |
| ||||
| Settings | |||||||
|
| Sleep Timer | 0 |
|
|
| ||
|
| Front Panel | On |
| ||||
|
| Command Mode | HDD 1 |
| ||||
|
| Format HDD |
|
|
|
|
| |
|
| Factory Setup |
|
|
|
| and | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Adjustments |
Record Subtitles |
|
|
|
| ||||
|
|
|
|
| ||||
Press the </, buttons to set the desired option. |
| |||||||
|
|
|
|
|
|
| ||
On |
|
| Allows you to record the subtitles |
|
|
| ||
|
|
| broadcasted by a digital channel |
|
| |||
|
|
| (when available). |
|
|
|
|
|
|
|
|
|
|
|
| ||
Off |
|
| Turns off the subtitle recording |
|
|
| ||
|
|
| function. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When you select “On,” a warning message appears. Press ENTER to confirm subtitle recording, otherwise press RETURN to escape.
bNotes
•Any recordings made with “Record subtitles” set to “On” cannot be compressed.
•Recordings made with “Record subtitles” set to “On” will take more disk space than those made without.
•When changing the “Record subtitles” setting, you will clear the Pause/Rewind TV buffer.
•Not all programmes have subtitle information and some interactive services may not operate while displaying subtitles.
,continued 43