1 Pull the top of the front door to open it.
Remove the labels.
Load the paper after matching the colors of the flange of the paper roll and the flange holder of the printer correctly.
Operation | 2 Pull the cover up. |
|
3 After removing the labels attached at both sides of the paper roll, place the paper roll in the paper holder.
Place the paper roll in the paper holder, so the pink flange is on the right and the blue flange is on the left.
Thermal head
Caution
Since the thermal head is still very hot just after printing is finished, be careful not to touch the thermal head when placing the paper roll in the paper holder.
4 Remove the label attached at the tip of the paper, then, while holding both ends of the paper, insert the paper into to the slot. Feed in the paper with your hand until the marking hole appears.
Roll the paper in properly so that it goes in straight.
Marking hole
10 Loading the Paper and Ink Ribbon