Identification of the printing pack currently being used on the information display
Display on the | Printing pack |
information display |
|
|
|
R35 | |
|
|
R46 | |
|
|
R57 | |
|
|
R68 | |
|
|
Notes
•Turn the printer on first.
•Don’t turn the printer on again within 5 seconds after turning it off.
•Do not turn the computer off and on again while it is accessing a hard or floppy disk.
2 Send the image data from the computer to be printed.
The printer starts printing.
1While the printer is receiving the image data, the following message should appear.
Indicates the image data is being transferred.
: Indicates 20% of the total amount of image data. In the above example, 60% of the total amount of image data has been transferred.
2The printer starts printing the transferred image data as soon as the print command is sent from the computer.
The PRINT indicator lights and the following message should appear.
Number of pages to be printed
The color indication changes as the color printing procedes: StarttYELLOWtMAGENTAtCYANtLAMIt Finsih.
3After printing is finished, the printed paper is ejected from the output slot.
The printing time depends on the print size, ink ribbon and the paper.
Once printing has been completed, the PRINT indicator goes off and READY appears on the information display again.
Note
Do not open the maintenance door while the printer is printing. Doing so may have an influence on the quality of the printout.
To stop sending the image data or to stop printing midwayPress and hold the FEED button for more than one second. The page currently being printed is completed and ejected. After the printout is ejected, the information display returns to READY. The image data stored in the memory and the number of printings set in the queue are cancelled.
About memorySince the printer has memory for image data spooling, image data to be printed can be transferred to the printer while printing an image.
Operation
Printing from the Computer | 15 |
|
|