For detailed information on how to install the ink ribbon and paper, see “Loading the Paper and Ink Ribbon” on page 9.
DIP Switch Settings
Set the SCSI ID with the DIP switches on the side panel. The DIP switches are set as follows when shipped from the factory.
Terminator | SCSI ID |
Preparation
Terminator ON/OFF SettingWhen the printer is connected as the terminating device on the SCSI bus, set the terminator to the ON position. Otherwise, set it to the OFF position.
Switch | ON | OFF |
TERMINATOR | Internal Terminator | Internal Terminator |
| ON | OFF |
|
|
|
Set the printer SCSI ID so that it is different from all other devices on the SCSI bus.
If two devices have the same SCSI ID, malfunctions may result.
SCSI ID | SCSI ID Switch |
| |
| 1 | 2 | 4 |
|
|
|
|
0 | 0 | 0 | 0 |
|
|
|
|
1 | 1 | 0 | 0 |
|
|
|
|
2 | 0 | 2 | 0 |
|
|
|
|
3 | 1 | 2 | 0 |
|
|
|
|
4 | 0 | 0 | 4 |
|
|
|
|
5 | 1 | 0 | 4 |
|
|
|
|
6 | 0 | 2 | 4 |
|
|
|
|
7 | 1 | 2 | 4 |
|
|
|
|
The SCSI ID is set to 1 as the factory setting.
DIP Switch Settings | 7 |
|
|