Sony VGC-RA930G, VGC-RA830G, Personal Computer Connecting the Wireless Mouse, Connecting the mouse

Connecting the Wireless Mouse

Connecting the Wireless Mouse

Your VAIO® computer is supplied with a wireless mouse. Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse. To connect your wireless mouse, it must be within 11 inches of the computer.

✍When attempting to connect the wireless mouse, confirm that the AA batteries (supplied) are properly inserted into the mouse before your computer is turned on.

1Press the CONNECT button, located on the bottom of the infrared receiver.

2Turn the wireless mouse over and slide the power button to the ON position.

3Press the CONNECT button on the bottom of the mouse.

Connecting the mouse

Power switch

Connect button

Additional information about using a wireless mouse

A wireless mouse requires unobstructed communication with the infrared receiver for proper operation.

❑To maintain good communication, operate your wireless mouse within 2 feet of the VAIO® computer.

❑Confirm that the supplied AA batteries are properly installed.

❑Press the CONNECT button located on the bottom of the infrared receiver first, and then press the Connect button on the bottom of the mouse.

❑Verify the infrared receiver is free of obstructions that may prevent proper operation.

❑Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless mouse. These devices may cause interference, causing your mouse to stop working properly.

45