Sony VGN S400 Series manual Connecting a Computer Display, To connect a computer display

Models: VGN S400 Series VGN-T300 Series

1 200
Download 200 pages 30.79 Kb
Page 84
Image 84

n N

84

Using Peripheral Devices

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the (optional) port replicator.

To connect a computer display

1If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.

2If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator.

3If your computer is one of VGN-S400 Series models with the NVIDIA video controller and you want to connect a TFT/DVI monitor, plug the display cable (not supplied) into the DVI-D port on the port replicator.

The port replicator for VGN-S400 Series models is equipped with the DVI-D port. When a model with the Intel 915GM integrated video controller is docked, however, this port is disabled. It is enabled only when a model with the models with the NVIDIA video controller is docked.

DVI-Dstands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has 24 pins.

A DVI-Iconnector (Digital Visual Interface - Integrated) supports digital video and analog video signals. It has 29 pins.

!

You can not connect a DVI-I to VGA cable to a DVI-D port!

Page 84
Image 84
Sony VGN S400 Series, VGN-T300 Series manual Connecting a Computer Display, To connect a computer display