From the S/PDIF group box:

•Check the Enable Dolby Digital Live check box.

•Verify that AC3 is the option selected for Format.

•Verify that Enable Digital Output is checked in the S/PDIF group box.

Note: If you are using an HDMI connection through a TV or an amplifier that supports 5.1 sound, do the following:

•check Enable HDMI Output

•select AC3 for the format

•check Enable Digital Output

5Close the Sound Reality Control Panel and the Windows Control Panel. Your 5.1 Surround Sound Speaker Setup is complete.

Speaker Setup Notes

•After the 5.1 channel sound is setup, sound will not be outputted through the HDMI connection. To enable HDMI sound, uncheck the Enable Dolby Digital Live check box and check/select the Enable HDMI Output check box located on the Sound Reality Control Panel, Advanced tab. This will disable the 5.1 channel sound output.

•Dolby Digital 5.1 must be selected for the audio output of the DVD from the DVD menu.

Note: The VGX-XL100 does not support dts sound decoding.

Step 3: Connecting to the Internet

Wired Network

Use an RJ-45 connector cable. Connect one end to the Ethernet connector on the computer and the other end to your cable or modem.

35

VGX-XL100 Living Room Entertainment ComputerLiving