•Wait about one hour after turning off the power. The inside of this device may be hot right after the power is turned off and may cause burns.
Please be careful when upgrading memory. Mishandling when installing and removing can cause a failure of this device. You are encouraged to request the installation be done by a dealer or professional.
If you upgrade the memory by yourself and forget to close the inside connector, insert the memory backward, or not completely seat the memory, a failure or damage may result. Repair costs in these and similar situations will be charged to the owner.
Contact customer support for questions about upgrading the memory. The Sony repair centers provide a service for charge for those who can't install the memory by themselves and for people who purchased or plan to purchase Sony memory.
Sony Supported Memory TypesThe following Sony memory modules can be installed in this device:
Capacity | Speed | Memory Module |
|
|
|
512 MB | DDR2 533 | |
|
|
|
Important Note: Always use DDR2 533 SDRAM DIMM
Using Standard Memory: DDR2
| Standard | Upgrade |
|
|
|
Capacity | Bank 0 | Bank 1 |
|
|
|
Standard (1024MB) | 512MB x 2 DDR2 533 |
|
|
|
|
1536MB | 256MB x 2 DDR2 533 | 512MB x 2 DDR2 533 |
|
|
|
52 |