Communicate Using Infrastructure Mode
Wireless LAN Access Point
Note: Before setting up your wireless LAN access point, make sure you have connected the Wireless LAN Antenna to the Wireless LAN Antenna connector located on the back panel of the
This device and a wireless LAN access point (sold separately) can be connected using the following procedure. For details, please refer to Windows Help.
Further access point settings are required to connect to the Internet or a LAN, etc. at work via an access point. For details, please refer to the manual included with the access point you use.
To connect to an access point:
1Select Turn Radio On by right clicking the red icon in the taskbar notification
area on the lower right desktop screen. The wireless LAN is turned on and the WLAN (wireless LAN) lamp turns green.
or
When the icon is not displayed in the taskbar notification area, click the Windows Start button. Then select All Programs > Marvell Wireless SoftAP > Marvell Wireless Soft_g_SoftAP Configuration Utility.
•Select Station Mode and make sure that Radio Off check box is unchecked from the Operation Mode screen. Then proceed to Step 4.
2Right click 
in the taskbar notification area on the lower right desktop screen and select Select Mode.
3From the Select Operations Mode screen, select Station. Make sure the Radio Off check box is unchecked and click OK. (See above image)
4Click Wireless Network in the taskbar notification area at the lower right of the screen on the desktop or the Wireless Network icon.
5From the Wireless network connection screen, select the wireless LAN access point to connect to from the Choose a wireless network list and click Connect.
Note: If you can't find the wireless LAN access point to connect to in the Choose a wireless network list, click on Refresh network list in Network tasks.
70 |