Use this device to function as an access point

Set this device to function as an access point for other computers.

To use this device as an access point

1Select Turn Radio On by right-clicking the red icon in the taskbar notification area on the lower right desktop screen.

The wireless LAN turns on and the WLAN (wireless LAN) lamp turns green.

Or, If the icon is not displayed in the communication area, click Windows Start, point to All Programs > Marvell Wireless SoftAP and then click Marvell Wireless Soft_g_SoftAP Configuration Utility.

•From the Operation Mode screen, select Station Mode and make sure the Radio Off check box is unchecked. Proceed to Step 4.

2Select Select Mode by right-clicking the red icon in the taskbar notification area on the lower right desktop screen.

The "Select Operation Mode" screen displays.

3Select Access Point (AP) in the Select Operation Mode screen and click OK.

The Marvell(R) CB-35P/MB-35P Wireless Client Card Settings Utility screen displays.

Note: When you set this as an access point for the first time or change the settings, the AP Information screen displays. The current access point settings are displayed in the AP Information screen.

Note: Do not continue displaying the settings because the network key is displayed in the AP Information screen.

4Click Cancel.

You can now use this device as an access point.

Set a Network Bridge.

Click How to use VAIO > Network (LAN) in "Internet/Network" > Use Network Bridge.

Marvell(R) CB-35P/MB-35P Wireless Client Card Settings Utility screen

77

VGX-XL1 Living Room Entertainment Computer