8Install the upper cover. Install the cover and tighten the screws on the back.
9Connect the power cord and the peripheral devices that were removed in Step 1 and turn on the power to this device.
10Click the Start button and then point to All Programs, VAIO System Information and then click VAIO System Information.
Make sure that System Memory displays the correct memory capacity. If the memory capacity is correct, memory installation is complete. If the memory capacity has not increased, remove the memory module after turning off the power to this device, and repeat the procedure to properly install the memory module again.
Remove Memory ModuleDischarge static in your body by touching the metal inside this device, and then press out and down on the clips on both of the memory slots. Carefully lift the memory module out of the slot.
1
58 |