Power/Start

Event:

Power is not on and green power lamp is not lit.

Comment:

Confirm that the computer’s power cord is inserted firmly into an outlet.

•Confirm that all of the cables are connected well.

•Remove all the cables connected to this device, and connect them again after waiting five minutes, then turn the power on again.

•If the device does not run after doing the above, please contact VAIO Link.

Event:

The power is turned on and the power lamp (green) of the computer is on, but there is no display on the screen.

Comment:

•Make sure the proper input for the display unit (TV, DVI-D monitor) is selected.

•Please confirm that the display unit (TV, DVI-D monitor) power is turned on.

If nothing is displayed on the screen after a time, please follow the procedures below.

•Make sure the computer is connected to the proper input.

•Hold the power button of this device for at least four seconds, make sure the power lamp turns off and then turn the power on again.

•If nothing is displayed after the above operation, hold the power button of this device again for at least four seconds, make sure that the power lamp turns off, then remove all cables connected to this device, and re-connect after waiting five minutes and then turn the power on again.

89

VGX-XL100 Living Room Entertainment Computer