To quit Ad Hoc mode

Quit the Ad Hoc Mode with the following procedure and return to

Infrastructure Mode.

1Click Start from the Windows taskbar, and then click Control Panel.

2From the Control Panel, click the Network Connections icon.

3From anywhere on the Network Connections screen, right-click and select Properties. The Wireless Network Connections Properties screen displays.

4Click the Wireless Network Connections icon and click Properties.

5From the Wireless Network Connections Properties screen, click the Wireless Networks tab. The list of Preferred Networks displays.

6Click Advanced and select Any Available Network (access point preferred) in Network to Access and click Close.

7Select the network selected in Ad Hoc Mode from the Preferred Network list and click Delete.

8Click OK.

About network keys

This is a data key for encrypting the wireless LAN communication between IEEE802.11b/g devices. This is also called a Private Key, Encryption Key or WEP Key.

This enables the wireless LAN communication only between the wireless LAN access points and computers which use same key information.

The network key is pre-set in each access point (please confirm that the network key setting is changed after purchasing to prevent illegal usage). If you don't know the network key, please refer to the manual that came with the access point or check with the access point administrator.

VGX-XL1 Living Room Entertainment Computer

76