5Install the hard disk upgrade in the hard disk drive bay. Secure the hard disk upgrade in the hard disk drive bay with the screws. Install in the lower bay when there is an open space in the lower bay.
6Connect the cables to both of the hard disks, the one installed at the time of purchasing and the upgraded hard disk.
Always install the serial ATA power cable and the serial ATA cable. In the meantime, connect the serial ATA cable between the PORT (Serial ATA) connector on the circuit board inside this device and the hard disk according to the following list:
Main Unit Expansion Connector | Hard Disk to Connect |
Designation |
|
PORT 0 (Port 0) | Hard disk in the lower drive bay |
|
|
PORT 1 (Port 1) | Hard disk in the middle drive bay |
|
|
PORT 2 (Port 2) | Hard disk in the upper drive bay |
|
|
Below is the install location of the hard disk and the corresponding PORT (Serial ATA) connector
63 |