High: Illuminates the projected image brightly.

Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the “High” setting.

Direct Power On

Set to “On” if you are using a circuit breaker to turn the power on/off the entire system. You can turn off the power just by unplugging the power cord without pressing the I/1 key.

Lens Control

When set to “Off,” the LENS (FOCUS, ZOOM) key on the Remote Commander, and the FOCUS and ZOOM keys on the projector do not function.

High Altitude Mode

The factory setting is “Off.”

Set to “On” when the projector is used at an altitude of 1,500 m or higher.

Security Lock

Turns on the projector’s security lock function.

Off: Turns off the security lock function.

On: Turns on the security lock function,

which locks the projector once a password has been set.

For details, see “Security Lock” on page 24.

The INFORMATION Menu

The INFORMATION menu displays the horizontal and vertical frequencies of the input signal and the used time of the lamp.

INFORMATION

I n p u t A

Memory

fH:

48 . 47kHz

number of

fV:

60.00Hz

an input

 

No.23

 

1024x768

signal

Lamp Timer:

0H

Signal

 

 

type

Menu Items

fH

Displays the horizontal frequency of the input signal.

The displayed value is approximate.

fV

Displays the vertical frequency of the input signal.

The displayed value is approximate.

Lamp Timer

Indicates how long the lamp has been turned on.

Note

These only display on the screen. You cannot alter the display.

GB 36 The INFORMATION Menu