Sony VPL-CX80 Component output, Connecting with a VCR, To connect to a video GBR, To connect to a video or S video output connector

Connecting with a VCR

This section describes how to connect the projector to a VCR.

For more information, refer to the instruction manuals of the equipment you are connecting.

To connect to a video or S video output connector

Right side

INPUT A	AUDIO	INPUT B
VIDEO IN
VIDEO	AUDIO
OUTPUT
MONITOR	AUDIO	REMOTE RS-232C

21

	to audio	to audio
to S	output (L)
video		output
	to video	(R)
output
	output

VCR

1Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)

2Video cable (not supplied) or S-Video cable (not supplied)

To connect to a video GBR/Component output

Right side

		AUDIO	INPUT B
	VIDEO IN
S VIDEO	VIDEO	AUDIO
	OUTPUT
MONITOR		AUDIO	REMOTE RS-232C

	2	1
	to	to
to video	audio	audio
GBR/	output	output
component	(L)	(R)

output

VCR

1Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)

2SMF-402 Signal Cable

(not supplied)

HD D-sub 15-pin (male) ↔ 3 ⋅ phono jack

Notes

•Set the aspect ratio using “Wide Mode” in the INPUT SETTING menu according to the input signal.

•When you connect the projector to a video GBR or component output connector, select “Video GBR” or “Component” with the “Input-A Signal Sel.” setting in the SET SETTING menu.

•Use the composite sync signal when you input the external sync signal from video GBR/component equipment.

Projecting and Up Setting

Connecting the Projector 19 GB