Connecting the

Projector

When you connect the projector, make sure to:

•Turn off all equipment before making any connections.

•Use the proper cables for each connection.

•Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.

To connect the projector, refer to the illustrations on the next and the following pages.

Connecting with a Computer

This section describes how to connect the projector to a computer.

For more information, refer to the computer’s instruction manual.

To connect a computer

Right side

A

 

AUDIO

INPUT B

 

 

 

 

VIDEO IN

 

 

S VIDEO

VIDEO

AUDIO

 

 

OUTPUT

 

 

MONITOR

AUDIO

REMOTE RS-232C

32 1

to audio output

Computer

to USB connector

to monitor output

Projecting and Up Setting

1Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)

2USB cable (supplied)

(Connect the USB cable to use a wireless

mouse.)

3HD D-sub 15-pin cable (supplied)

Notes

•The projector accepts VGA, SVGA, XGA, SXGA and SXGA+ signals. However, we recommend that you set the output mode of

Connecting the Projector 17 GB