image to its original size. This key functions when the menu or a setting item is displayed on the screen.

qd D ZOOM (Digital Zoom) +/– key

Enlarges the image at a desired location on the screen.

qf Arrow keys (M/m/</,) qg MENU/TAB key

Functions as a MENU key.

qh APA (Auto Pixel Alignment) key

Automatically adjusts a picture to its clearest while a signal is input from a computer.

For details on APA, see “Smart APA” in the SET SETTING menu on page 32.

qj VOLUME +/– keys qk LENS key

Each time you press this key, Focus adjustment menu and Zoom adjustment menu are displayed alternately.

ql PJ/NETWORK (Projector/Network) selector switch

Normally, set to “PJ”.

w; COMMAND ON/OFF switch

When this switch is set to OFF, no key on the Remote Commander function. This saves battery power.

wa Infrared transmitter
To install batteries

1 Push and slide to open the lid, then install the two size AA (R6) batteries (supplied) with the correct polarity.

While pressing the lid, slide it.

Overview

 

Be sure to install the battery from the # side.

2 Replace the lid.Notes on Remote Commander

•Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the front or rear remote control detector.

•The operation range is limited. The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the commander can control the projector becomes.

Location and Function of Controls 15 GB