F7 or Fx

and

Fn

6 Adjust the upper or lower position of the picture.To adjust using the RemoteCommander

Press the TILT/KEYSTONE key on the Remote Commander to display the Tilt menu and adjust the tilt using the M/m/ </, keys.

To adjust using the control panel

Press f or F of the TILT key to adjust the tilt of the projector.

to lower the

to raise the

projector

projector

TILT

TILT adjustment key

Powered tilt adjuster

Notes

•When you adjust the powered tilt adjuster with the TILT key, the V keystone adjustment is performed at the same time. If you do not want to perform the automatic keystone adjustment, set the V Keystone menu to “Manual.” (See page 35.)

•If you set the “V Keystone” adjustment to “Auto,” the “V Keystone” correction is automatically adjusted. However, it may not be perfectly adjusted depending

on the room temperature or the screen angle. In this case, adjust it manually.

•Press the TILT/KEYSTONE key on the Remote Commander until “V Keystone” appears on the screen, and adjust the value with the M/m/</, key. The corrected value is effective until the power turn off.

•Be careful not to let the projector down

on your fingers.

 

 

 

 

• Do not push hard on the top of the

 

 

 

 

projector with the powered tilt adjuster

 

 

UpSetting

7 Adjust the horizontal trapezoidal

out.

 

 

It may be occurred malfunction.

 

distortion ()of the picture with

and

the “Side Shot.”

 

 

Projecting

 

 

To adjust using the Remote

Commander

Press the TILT/KEYSTONE key on the Remote Commander to display the Side Shot menu (horizontal trapezoidal distortion/H keystone correction) and adjust the tilt using the M/m/</, keys.

To adjust using the control panel

Press the SIDE SHOT +/ – key on the control panel to adjust the distortion. For details, see ““Side Shot” and “V Keystone” Adjustments” on page 56.

8 Adjust the size of the picture and the focus.

To adjust using the Remote

Commander

Select the item to be adjusted by pressing the LENS key, then adjust with the M/m/</, key. Each time you press the key, the menu changes to LENS FOCUS and LENS ZOOM in order.

To adjust using the control panel Press the ZOOM +/– keys on the projector to adjust the size of the picture and press the FOCUS+/– keys to adjust the focus.

Projecting 21 GB