Control Panel
1 | 2 3 | 4 5 | 6 |
a?/1 (On/Standby) key
Turns on the projector when the projector is in standby mode. To turn off the power, press the ?/1 key twice according to the message or hold the ?/1 key for about one second.
Lights up or flashes under the following conditions:
–Lights in red when the AC power cord is plugged into a wall outlet. Once the projector is in standby mode, you can turn it on with the ?/1 key.
–Flashes in red when the temperature becomes high inside the projector, or when the projector fails to operate.
–Lights in green when the power is turned on, and when it is ready to operate.
–Flashes in green from the time when the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key. The fan runs for
about 90 seconds after the power is turned off.
–Lights in orange when the power saving mode is on.
For detail, see page 22.
bINPUT key
Selects an input signal. The input signal will change whenever you press the key.
cENTER/v/V/b/B (Arrow) keys
Used to enter the settings of items in the menu system, select a menu, or make various adjustments.
dLAMP/COVER indicators
Flashes in orange under the following conditions:
•A repetition rate of 2 flashes when the lamp cover or air filter cover is not secured firmly.
•A repetition rate of 3 flashes when the lamp has reached the end of its life or reaches a high temperature.
12 Location and Function of Controls