Setting items | Functions | Initial setting |
|
|
|
Power Saving | Selects the Power Saving mode. | Off |
| • Lamp off: The lamp goes off if no signal is input for |
|
| 10 minutes. The lamp lights again when a signal is |
|
| input or any key is pressed. |
|
| • Standby: The projector goes into Standby mode if |
|
| no signal is input for 10 minutes. To use it, turn on |
|
| the power again. |
|
| • Off: The projector does not go into Power Saving |
|
| mode. |
|
|
|
|
Panel Key Lock | Locks all the control panel keys on the top panel of the | Off |
| projector so that the projector can be operated only |
|
| with the Remote Commander. |
|
| To lock the control panel keys, set to “On.” |
|
| When it is set to “On,” keeping the ?/1 key on the |
|
| control panel pressed for 10 seconds turns the projector |
|
| on when it is in standby mode, and turns the projector |
|
| to standby mode when the power is on. |
|
| If you press and hold the MENU key for about 10 |
|
| seconds when the power is on, the lock will be released |
|
| and “Panel Key Lock” is automatically set to “Off.” |
|
|
|
|
CC Display | Turns on or off the Closed Captions (CC) function. | Off |
| • Off: Turns off the Closed Captions (CC) function. |
|
| • CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/ |
|
| TEXT4: Selects a displayed version of the dialogue |
|
| or sound channel of a program. |
|
|
|
|
Lamp Timer Reset | When replacing the lamps, reset the lamp timer. | – |
|
|
|
Notes
•Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen.
-You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.
-The picture may not be adjusted properly depending on the type of input signal.
-Adjust the “Dot Phase,” “H Size,” and “Shift” items on the INPUT SETTING menu when you adjust the picture manually.
•If the input signal is not displayed correctly when the input A signal classifying is set to “Auto”, set it to conform the input signal.
•Closed Captioning is not displayed in the following cases:
-while you are adjusting the volume with VOLUME +/- on the remote commander
-while you are operating
-while “Please replace the Lamp.” is displayed on the screen
34 The SET SETTING Menu