Connecting the

Projector

When you connect the projector, make sure to:

•Turn off all equipment before making any connections.

•Use the proper cables for each connection.

•Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out by the plug, not the cable itself.

Connecting a Computer

This section describes how to connect the projector to a computer.

For more information, refer to the computer’s instruction manual.

To connect a computer

Rear side

VPL-EX70

to monitor output

Computer

to audio input

1HD D-sub 15-pin cable (supplied)

2Stereo audio connecting cable (not supplied) (Use a no-resistance cable.)

Notes

•For stereo audio connection, connect the stereo audio connecting cable to the AUDIO INPUT connector.

•The projector accepts VGA, SVGA, XGA, SXGA, SXGA+, WXGA signals. However, we recommend that you set the output mode of your computer to SVGA (VPL-ES7) or XGA (VPL-EX70/EX7) mode for the external monitor.

•If you set your computer, such as a notebook computer, to output the signal to both your computer’s display and the external monitor, the picture of the external monitor may not

18 Connecting the Projector