Setting items | Functions | Initial setting |
|
|
|
Aspect (When the | You can set the aspect ratio of the picture to be | Set according to |
PC signal is input) | displayed for the current input signal. This item is | the input signal |
| enabled only when an PC signal (preset memory |
|
| numbers 21 to 63) is input. |
|
| • Full 1: Displays a picture vertically or horizontally to |
|
| fill the screen without changing the aspect ratio of the |
|
| original picture. |
|
| • Full 2: The original image is projected fully in the |
|
| window. |
|
| • Normal: Displays the picture while matching one |
|
| pixel of input picture element to that of the LCD. The |
|
| picture will be clear but the picture size will be |
|
| smaller. |
|
|
|
|
Notes
•For Aspect, some of the “Aspect” setting items are not displayed on the screen according to the input signal.
•Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide mode may constitute an infringement of the rights of authors or producers, which are legally protected.
About the Preset Memory No.
This projector has 45 types of preset data for input signals (the preset memory). When a preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are displayed on the INFORMATION menu (See page 38). You can also adjust the preset data through the INPUT SETTING menu.
See the chart on page 50 to find if the signal is registered in the preset memory.
Note
When the aspect ratio of input signal is other than “Full 2”, a part of the screen may be displayed in black.
32 The INPUT SETTING Menu