5 Insert the new lamp all the way in until it is securely in place (a). Tighten the two screws (b). Fold down the handle to replace it (c).
Notes
• Be careful not to touch the glass surface of the lamp.
• The power will not turn on if the lamp is not secured properly.
• Do not allow any liquid or other objects into the slot to avoid electrical shock or fire.
6 Close the lamp cover and tighten the screw.
Note
Be sure to attach the lamp cover securely as it was. If not, the projector cannot be turned on.
7 Turn the projector back over.
8 Connect the power cord. The ?/1 key lights in red.
9 Press the ?/1 key to turn the projector on.
10Press the MENU key, and then select the SET SETTING menu.

11Select “Lamp Timer Reset”, and then press the ENTER key.

SET SETTING

Input-A

Smart APA:

On

Auto Input Search: Off

Input-A Signal Sel.: Auto

Color System:

Auto

Power Saving:

Off

Panel Key Lock:

Off

CC Display:

Off

Lamp Timer Reset

 

12Select “Execute” with the V key, and then press the ENTER key.

The Lamp Timer is initialized to 0, and “Change the Lamp and clean the Filter?” is displayed in the menu screen.

Change the Lamp and clean the Filter?

Yes: No:

Refer to page 42 for “Cleaning the Air Filter”.

13Select “Yes” with the v key.

“Lamp Timer Reset Complete!” is displayed in the menu screen.

Disposal of the used lamp

For the customers in the USA

Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

Maintenance

Replacing the Lamp 41