Hot and humid
•Avoid installing the unit in a location where the temperature or humidity is very high, or the temperature is very low.
•To avoid moisture condensation, do not install the unit in a location where the temperature may rise rapidly.
Locations subject to direct cool or warm air from an air-conditioner
Installing the projector in such a location may cause a malfunction of the unit due to moisture condensation or a rise in temperature.
Near a heat or smoke sensor
Malfunction of the sensor may occur.
Very dusty, extremely smoky locations
Avoid installing the unit in a very dusty or extremely smoky environment. Otherwise, the air filter will become obstructed, and this may cause a malfunction of the unit or damage it. Dust preventing the air passing through the filter may cause a rise in the internal temperature of the unit. Clean the air filter whenever you replace the lamp.
Unsuitable Conditions
Do not use the projector under the following conditions.
Do not stand the unit upright on one side
Avoid using the unit standing upright on its side. It may cause malfunction.
Do not tilt the unit to the right or left
Avoid tilting the unit to an angle of 15°, and avoid installing the unit in any way other than placing it on a level surface or suspending from the ceiling. Such an installation may cause color shading or shorten the lamp life excessively.
Notes on Installation and Usage | 7 |
|
|